Spooring Mobil Trigon Novo
- Quality camera 3d system
- 11” to 25” (with adaptor) clamps with passive targets of resistant material
- Main unit complete with pc holder and platform for keyboard and printer
- Practical trolley for clamp and sensore holder (optional)
- Lift drive-on assistant by remote camera for easy vehicle positioning (optional)
- User friendly software. Intutive two key selection and easy access tutor sw.
Technical data:
Range
- Total toe: ± 48o
- Camber: ± 10o
- Caster: ± 30o
- King pin: ± 30o
- Set back: ± 24o
- Thrust angle: ± 24o
- Steering angle: ± 24o
Power
- Power supply voltage: 115-230 Vca (50-60Hz) 1 ph
- Power absorption: 500 W
Ambient conditons for equipment storing
- Relative humidity: 20% ÷ 80%
- Temperature range: -10÷ +60
- Noise level when running ≤ 70 dB
Accessories
Standart
- Complete set of 11” to 21” clamps with passive targets
- Adaptor for clamps up to 26”
- Wall mounting brackets for sensor holders with targets
- Pair turntables
- Turntable adaptor for push mode ROC procedure
- Steering wheel holder
- Pedal depressor
Optional
- Lift drive-on assistant
- Trolley for clamp and sensor holder
- Motorized beam
- Calibration kit
Main feature
- Quality components and europe design
- 0,01o data display
- 10” to 21” sensor holder, 26” with standart adaptor
- Intiutive two key operation
- User friendly software with easy access tutor help
- Easy access to all adjustment values
- Automatic steering measurements directly from targets
- Graphics indications for adjustment in mondolfo family feeling design
- Chassis measurement data
- Factory calibrated, calibration on instalation only, no need for maintenance calibration
- A first class international based databank
- Databank on HD
- User databank for insert or modification vehicle data
- Job operation customer databank, to recall and memorize all customer data
- Wall mounting kit for clamp and target storage
- Lift drive-on assistant by remote camera (optional)
- Practical side trolley for clamp and target holder (optional)
- Camera movement to work from ground floor to 2 meters (optional)
Anda harus login untuk mengirimkan ulasan.
Produk Terkait
-
-
-
-
Baca selengkapnyaNo. Nama Keterangan 1 “Fly Speed” Tyre Changer FS-812 1 unit 2 “Fly Speed” Wheel Balancer FS-966 1 unit 3 “Trigon Novo” Wheel Alignment 3D 1 unit 4 “Hi-Com” HC-3.5 M4 Scissor Lift + Pit Jack 1 unit 5 “Fly Speed” Automatic Nitrogen Generator FS-4000 1 unit 6 “IKAME” Air Compressor 3 HP 1 unit
-
Ulasan
Belum ada ulasan.